Natural Gas Input Min. 11,000 Btu  Max. 199,000 Btu 
LPG Input Min. 11,000 Btu  Max. 199,000 Btu 
Gas Connection 3/4"   
Water Connection 3/4"   
Natural Gas Pressure Inlet Min 5.0" W.C.  10.5" W.C. 
LP Gas Pressure Inlet Min 8.0" W.C.  13.5" W.C. 
Weight 40 lbs.   
Dimensions 20.5" x 13.8" x 8.5"   
Ignition Electronic Ignition   
Electrical Supply AC 120 V   
Water Pressure Max. 150 psi  Max. 150 psi 
TM-RE30
Temperature Remote Control
The TM-RE30 Temperature Remote Controller allows the output temperature to be adjusted beyond the factory settings, and works as a diagnostic tool for error codes.
TK-TV04
Outdoor Ventilator Cap
The TK-TV04 vent cap kit is installed on the top of the unit to allow outside installation of the tankless unit.
TK-RB01
Recess Box
The TK-RB01 Recess box completely houses the tankless unit and allows the installation to be entirely recessed into a wall.  The recess box measures just over 14 inches wide to easily fit in-between studs.
TK-RB01 Spec. Sheet
9008004005
Sidewall Vent Terminator (Hood) and Wall Thimble (4”-7”)
Sidewall Vent Terminator (Hood) and Wall Thimble (4”-7”)
9007996005
Backflow Preventer & F-F Adaptor
Backflow Preventer & F-F Adaptor
9007671005
Pipe Cover
The 9007671005 Pipe cover is designed to be attached directly to the bottom side of the unit to provide a cover for the pipe connection entry.
9007667005
Direct Vent Conversion Kit
Direct Vent Conversion Kit
9007605005
Isolation Valves & Pressure Relief Valve
Isolation valves are used to isolate a unit for service. The Pressure Relief Valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi.
9007604005
Lead free Isolation Valves & Pressure Relief Valve
Lead free Isolation valves are used to isolate a unit for service. The Pressure Relief Valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi. (1953 Compliant)